Home Entertainment by Geoffrey Morrison 22 hrs ago. Position the floppy drive vertically with the eject button on the left side close to the HDDs. Position the backplane into its slot with the component side facing the rear panel, The picture below shows the location of jumper J1 with pins and shorted. If correctly installed, the outer edge of the backplane aligns with the corner of the drive cage.
|Date Added:||26 November 2010|
|File Size:||63.31 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Page of 66 Go. Place a SATA hard disk into the drive tray, and secure it with four screws. Repeat steps 2 and 3 to remove the other three footpads. Enter text from picture: Internal features The barebone server system includes the basic components as shown.
Slide the cover toward the front until it snaps in place. Page 4 Contents 2. You do not need to disconnect these cables unless Contents This guide contains the following parts: Each wheel has a brake lock The social network announced that some users’ unpublished photos were potentially exposed.
Make sure to unplug ALL power cables from the system devices before removing the power supply module.
ASUS AP130-E1 – no CPU – Monitor : none. Series
Carefully pull out the drive from the chassis until you see the cables connected to the drive. If correctly installed, the outer edge of the backplane aligns with the corner of the drive cage.
Be respectful, keep it civil and stay on topic. Card lock tab 2. Swing the front panel to the left and fit the four 4 hooked tabs to the left side of the chassis until the tabs snap back in place.
Chapter 1 This chapter describes the features of the motherboard. Networking Data Link Protocol.
ASUS APE1 User Manual – Page 1 of 66 |
Disconnect the floppy disk cable and power cable from the drive to completely release the drive. The motherboard has two bit and PCI Jumpers 1. It includes brief explanations of the special attributes of Chapter 1 This chapter describes the general features of the barebone server.
Open the bezel to access the front panel components. Use a flat screwdriver to flip out the top layer of a footpad. Installing A Cpu 2. Locate four hooks inside the HDD fan case.
Attach Rail 2 to the other side of the drive as shown. Memory Max Supported Size. Asus apr dual pentium iii 1u rackmount server user’s manual 44 pages.
The bezel covers the system components on the front panel and serves as security. References Refer to the following sources for additional information, and for product and software updates. Installation Options The items required for the optional configurations described in this chapter are not included in the standard barebone system package. Re-installing The Front Panel Assembly 1. wsus